Emotional Intelligence

Objectives:

• Define and practice self-management, self-awareness, self-regulation, self-motivation, and empathy.
• Understand, use and manage your emotions.
• Verbally communicate with others.
• Successfully communicate with others in a non-verbal manner.
• Identify the benefits of emotional intelligence.
• Relate emotional intelligence to the workplace.
• Balance optimism and pessimism.
• Effectively impact others.

Cost: TT$1500.00 (includes non-refundable registration fee of $500.00)

Duration: 6 hours

Facilities Management 1

Target Audience:

This course targets current employees within the industry such as maintenance and facility managers, engineers and project managers, facility technicians and support staff that are seeking an introduction to the fundamentals of Facilities Management.

Mode: Online

Objectives:

The objective of this course is to expand Facilities Management knowledge in areas such as:

• The core competencies of Facilities Management
• Environmental Science in Buildings
• Building Services Engineering
• Defects and Deterioration in Buildings
• Maintenance Planning and Scheduling
• Preventive Maintenance and Building Operation Efficiency
• Facility Emergency Preparedness and Business Continuity
• Planning Finances and Budgeting
• Environmental Stewardship and Sustainability

Cost: TT$2495.00 (includes non-refundable registration fee of $995.00)

Duration: 30 hours

Facilities Management – Level 2

Target Audience:

• Facilities Managers, Engineers, Supervisors, Technicians, Handymen, etc.
• Persons interested in a career in the field of Facilities Management
• Facilities Administrative support staff

Pre-Requisites

• Facilities Management – Level 1

At the end of this programme, persons should be able to:

• Identify planned maintenance tasks for common facilities management systems
• Appreciate cost/benefit feasibilities for various planned maintenance activities
• Establish planned maintenance programmes for outsourced and in-house implementation
• Establish a monitoring programme to ensure effective implementation of planned maintenance

Cost: TT$1500.00 (includes non-refundable registration fee of $500.00)

Duration: 40 hours

Facilities Management 3

Target Audience:

• Facilities Managers, Engineers, Supervisors, Technicians, Handymen, etc.
• Persons interested in a career in the field of Facilities Management
• Facilities Administrative support staff

Pre-Requisites

• Facilities Management 2

At the end of this programme, persons should be able to:

• Identify and implement key routine Operations tasks for common FM systems
• Determine and execute key troubleshooting practices for common FM systems
• Properly trigger required attention to issues in FM systems performance
• Undertake basic contingency actions in system maintenance and operations

Cost: TT$1500.00 (includes non-refundable registration fee of $500.00)

Duration: 40 hours

Facilities Management 1

Target Audience:

This course targets current employees within the industry such as maintenance and facility managers, engineers and project managers, facility technicians and support staff that are seeking an introduction to the fundamentals of Facilities Management.

Objectives:

The objective of this course is to expand Facilities Management knowledge in areas such as:

• The core competencies of Facilities Management
• Environmental Science in Buildings
• Building Services Engineering
• Defects and Deterioration in Buildings
• Maintenance Planning and Scheduling
• Preventive Maintenance and Building Operation Efficiency
• Facility Emergency Preparedness and Business Continuity
• Planning Finances and Budgeting
• Environmental Stewardship and Sustainability

Cost: TT$2495.00 (includes non-refundable registration fee of $995.00)

Duration: 30 hours

Home Nursing and Geriatric Care – Level 1

Target Audience:

• Family members and caregivers who want/need training in home nursing or senior care

At the end of this programme, persons should be able to apply:

• Knowledge of aging to general practice
• Appropriate skills to prepare and maintain the environment of the individual
• Appropriate tests for vital signs
• Measures to assist individuals carry on their daily activities and medical activities
• Measures to ensure the safety of individuals and emergency management
• Measures to care for ulcers, wounds and skin conditions

Cost: TT$2650.00 (includes non-refundable registration fee of $250.00)

Duration: 60 hours

I Can Fix It – Level 1

Learn the basics of household:

• Carpentry
• Painting and Decorating
• Plumbing and
• Basic Electrical jobs

Be able to:

• Use basic electrical/hand tools
• Glue and screw a wooden joint
• Prepare a surface for painting and decorating
• Choose and use correct paints
• Unblock clogged toilets and sinks
• Replace broken toilet handles
• Fix a dripping tap
• Replace light switches

and much more …

Cost: TT$2495.00 (includes non-refundable registration fee of TT$995.00)

Duration: 20 hours

I Can Fix It – Level 2

Learn the basics of household:

• Carpentry
• Painting and Decorating
• Plumbing and
• Basic Electrical jobs

Be able to:

• Make half-lap joint using tenon saw, glue and screws
• Make shelving using shelf brackets, plastic wall plugs
• Remove and replace door handle and lock
• Un-hinge and re- hinge door
• Remove and repair broken window glass
• Drill wall and insert plastic wall plug, fix curtain holder and cut pipe
• Tiling introduction (floor and wall tiles)
• Fit sink ‘P’ trap
• Replace power socket outlet and replace with Ground Fault Circuit Interrupter, (GFCI)
• Remove damaged fluorescent lamp ballast replace with serviceable item
• Electrically wire overhead shower

and much more …

Pre-requisite: I Can Fix It – Level 1

Cost: TT$2495.00 (includes non-refundable registration fee of TT$995.00)

Duration: 20 hours

Introduction to Air Compressors

Topics covered include:

• Compressor fundamentals and systems
• Compressor installation and maintenance
• Air distribution systems
• Application to pneumatic actuators

Cost: TT$250.00 (TT$199.00 for current and past ATC students. Includes non-refundable registration fee of $50.00. )

Duration: 3 hours

Introduction to CAD – 2 Dimensional (2D) Computer Aided Design

Learn about:

• File Management
• Drawing Set-up and Drawing Aids
• Layers and Operating Efficiency
• Drawing, Editing and Dimensioning
• Drawing Display and Plotting

Cost: TT$1050.00 (includes non-refundable registration fee of $500.00)

Duration: 24 hours

Introduction to (Automobile) Engine Fundamentals

• Topics covered include:
• Safety
• Introduction to the Automobile
• Vehicle Checks before Operating
• Auto Care
• Electrical Systems
• Lubricating Systems
• Fuel Systems
• Cooling Systems
• Ignition System
• Quick Index
• Routine Maintenance Checks

Cost: TT$995.00 (includes non-refundable registration fee of $300.00)

Duration: 20 hours

Introduction to Autotronics

Objectives include:

• Know the basic electronic components used in this field of study.
• Learn the names, symbols and applications of the electronic components.
• Learn to identify and understand electrical and pictorial diagrams.
• Know the reasons for using different electronic components and their functions in the circuits in which they are found.
• Learn to build electronic circuits from electrical and pictorial diagrams.
• Learn to interpret the values of resistors using the colour code chart.

Cost: TT$995.00 (Includes non-refundable registration fee of $100.00. )

Duration: 20 hours

Introduction to Basic Car Care

Topics covered include:

• Understanding the Car’s Instruments and Controls
• Safety
• Maintenance and Do-it-yourself Processes on your Vehicles
• Handling Emergencies on your Vehicles

Cost: TT$499.00 (includes non-refundable registration fee of $100.00)

Duration: 6 hours

Introduction to Basic Electronics

Topics covered include:

• Basic Electricity and Fundamental Laws
• Resistors
• Capacitors
• Inductors

Cost: TT$499.00 (includes non-refundable registration fee of $100.00)

Duration: 9 hours

Introduction to Basic Electronics and Robotics

Topics covered include:

• Basic Electricity and Fundamental Laws
• Resistors
• Capacitors
• Inductors
• Introduction to Robotics
• Programming the Robot

Cost: TT$750.00 (includes non-refundable registration fee of $200.00)

Duration: 18 hours

Introduction to Blueprint Reading and Draughting

Target Audience:
This course targets persons who wish to learn the fundamentals of blueprint reading and draughting.

Mode: In-person

Objectives:

At the end of this course, students should be able to:

• Understand the basic draughting instruments and how to use them to complete any drawing. Set up drawing sheet and use instruments to create borders and title blocks.
• Know the primary lettering style for engineering drawings and use it to create Title Blocks, Notes, and other annotations.
• Use instruments to perform basic geometrical constructions and use the principles learned to create simple drawings.
• Know the various technical sketching techniques and produce simple sketches during design brainstorming and ideation.
• Demonstrate a sound understanding of Orthographic Projection. Use the concept of visualization and the technical sketching techniques they have learnt to create object views.
• Create and layout views according to First Angle or Third Angle projection.
• Understand the concept of three (3) standard views and create views using lines of projection and visualization. Understand the need for sections and auxiliary views to describe an object clearly.
• Know dimensioning techniques and completely dimension any drawing as required.
• Read blueprints and recognize common drawing symbols found in specific engineering disciplines.

Cost: TT$4800.00 (includes non-refundable registration fee of $1200.00)

Duration: 30 hours

Introduction to Compressors

Cost: TT$199.00 (TT$99.00 for current ATC students. Includes non-refundable registration fee of $50.00. )

Duration: 3 hours

Introduction to Computer Skills for Technicians

Learn how to use:

• Microsoft Word
• Microsoft Excel
• Microsoft PowerPoint
• Microsoft Visio

Cost: TT$1050.00 (includes non-refundable registration fee of $300.00)

Duration: 15 hours

Introduction to Controls Design

Topics covered include:

• Review of Classical Control and Modelling
• Internal Model Control Design Procedure for SISO systems; (Q parametrisation, relationship to state feedback) with implications for PID, Smith predictors; and Extensions to Unstable Plants
• Saturation and Anti-integral Windup schemes
• State Space Models, and Systems Theory (Controllability, Observability, State Variable Feedback, Observers)
• Design Constraints in Feedback Control Systems
• Elements of System Identification
• Introduction to Multivariable Control (Decoupling, Interaction, Analysis & Design)
• Introduction to Optimal Control and Estimation.

Cost: TT$1195.00 (includes non-refundable registration fee of $300.00)

Duration: 20 hours

Introduction to Electrical Installation

Target Audience:
This course targets beginners as well as persons who want to enhance their knowledge and practical skills. It is also ideal for persons who want to ensure that they are using proper techniques and for those who want to build their confidence and capability in this field.

Trainees will learn how to:

• Incorporate a multi-meter to execute various tests that should be conducted before energizing a domestic installation. (Verification of polarity, Insulation Resistance, Continuity)
• Construct a variety of circuits in accordance with the Trinidad and Tobago Bureau of Standards (I.E.E regulations)
  (single way switching, two way switching, two way with intermediate, fluorescent luminaries, receptacle outlets, GFCIs etc) All circuits will be energized using the appropriate size circuit breakers.
• Select the appropriate size cables for the relevant circuits and where they are applied.
• Apply practical skills in conduit and trunking installation (offsets, 90 degree bends), wire stripping techniques and various joint construction methods (bell hanger, tee and marriage).

Cost: TT$1950.00 (includes non-refundable registration fee of $950.00)

Duration: 25 hours

Introduction to Hydraulics

Course Topics:

• Basic hydraulic theory and principles
• Schematic and graphical symbols used in hydraulics
• Hydraulic fluids and their application
• Hydraulic systems and the functions of its components
• Hydraulic pumps’ operations
• Troubleshooting hydraulic systems

Cost: TT$3,200.00 (includes non-refundable registration fee of $1,800.00)

Duration: 24 hours

Introduction to Hybrid Technology

Topics and questions covered include:

• Hybrid Types
• Safety
• Identification of Parts
• Basic Operation and Maintenance

Cost: TT$599

Duration: 6 hours (includes non-refundable registration fee of $300.00)

Introduction to Instrumentation

Learn about:

• Basic Manual and Automatic Controls
• Pressure and Level Sensors
• Flow and Temperature Sensors
• Process and Instrument Drawings
• Valves

and much more….

Cost: TT$1050.00 (includes non-refundable registration fee of $300.00)

Duration: 15 hours

Introduction to Manicure and Pedicure Technology

Learn about:

• Manicures
• Pedicures
• Waxing

Note:

• Spa apprenticeship opportunities are available for students who complete course successfully and who demonstrate good work ethic.
• Students get a course beauty kit

Cost: TT$3500.00 (includes non-refundable registration fee of $1000.00)

Duration: 60 hours

Introduction to Measurements in Construction

Learn about:

• The Use of the S.M.M (Standard Method of Measurements).
• The Build up of Unit Rates for the Purpose of Obtaining Gross Estimate for Work.
• The Design and Preparation of Simple Schedules.

and much more….

Cost: TT$300.00 (includes non-refundable registration fee of $100.00)

Duration: 15 hours

Introduction to Power Design

Topics and questions covered include:

• Markets and Applications for Photovoltaic Systems (PV)
• PV Safety
• Basics of Electricity
• Fundamentals of Solar Energy
• Module Fundamentals of Photovoltaic Systems
• System Components
• Sizing
• Electrical Design
• Mechanical Design
• Performance Analysis and Troubleshooting

Cost: TT$1195.00 (includes non-refundable registration fee of $300.00)

Duration: 20 hours

Introduction to Programmable Logic Controllers (PLCs)

Topics covered include:

• Introduction to the Purpose, Functions, and Operations of PLCs
• Components of PLC System Block Diagram of PLC
• Hardware Configuration
• I/O Addressing
• Scan and Memory Configuration
• Relay Ladder Logic
• Programming Software: RS Logic
• Basic PLC Instruction Set
• Timers
• Counters
• Programming Applications using Sequencers

Cost: TT$1195.00 (includes non-refundable registration fee of $300.00)

Duration: 20 hours

Introduction to Pumps

Topics Covered Include:

• Types of Pumps and Applications
• Pump Selection
• Basic Maintenance
• Troubleshooting Techniques

Cost: TT$350.00 (includes non-refundable registration fee of $100.00)

Duration: 6 hours

Introduction to Safety in Industry

Learn:

• How to choose appropriate protective clothing for the workplace.
• The proper safety practices for avoiding common kinds of accidents in the workplace.
• The procedures for the treatment of electric shock and the correct practices to avoid electric shock.
• Safe practices for using common tools and equipment.

and much more…

Cost: TT$295.00 (includes non-refundable registration fee of $100.00)

Duration: 10 hours

Introduction to Small Engine Repairs

Topics covered include:

• Identify four stroke and two stroke cycle engines
• Explain how the two and four cycle stroke engine work
• Identify and list the function of the various systems that keep an engine working
• Perform and test and service ignition system and compression service engine system
• Perform troubleshooting problems in small gas engines
• Tune up Small Gas Engines
• Identify reasons for disassembling an engine
• 4 stroke/cycle
• 2 stroke/cycle
• Perform an overhaul procedure
• Check and service engine components and valve train assembly
• Dis-assemble & re assemble small engines

Cost: TT$995.00 (includes non-refundable registration fee of $300.00)

Duration: 20 hours

Introduction to Technical Drawing

Learn about:

• Drawing Fundamentals e.g. Paper Sizes, using the T-square, Types of Lines, Letters and Numbers,
• Symbols and Abbreviations, Dimensioning.
• Lines and Angles.
• Triangles, Quadrilaterals, Polygons and Circles

and much more….

Cost: TT$1050.00

Duration: 24 hours (includes non-refundable registration fee of $300.00)

Introduction to Technical Report Writing

Topics covered include:

• Understand the types and purposes of technical reports
• Write realistic specifications
• Organise reports and plan the sections and subsections you need
• Fully understand the steps in writing a report
• Write clear and concise formal reports, equipment manuals and other technical documentation
• Understand the principles of clear and concise writing
• Develop effective communication with technical as well as non-technical staff at all levels – matching your content to your readers’ knowledge
• Keep information specific rather than general
• Brainstorm and identify technical problems and solutions
• Collect, organise, analyse and evaluate information
• Appreciate the use of active verbs rather than passive verbs
• Edit wordy phrases – using simple words rather than complex ones
• Keep technical terms to a minimum – avoiding jargon, acronyms and abbreviations
• Use examples and illustrations
• Transfer technical information into graphs, flowcharts and tables
• Use good layout to draw attention to key technical information
• Translate technical documents into compelling oral presentations

Cost: TT$1500.00 (includes non-refundable registration fee of $300.00)

Duration: 20 hours

Introduction to Valves

Target Audience:

• Students and Graduates of Mechanical Engineering Technician Programmes
• Technicians
• Engineers
• Supervisors
• Facilities Managers
• Handymen

Overview:

• Introduction to Control Valve Theory
• Types of Control Valves, Actuators and Accessories
• Control Valve performance considerations
• New technology: “Smart” valves and wireless
• *Valve Sizing Considerations
• Installation and Maintenance Issues

*This topic refers to considerations for sizing and is NOT Valve Sizing Training. Full competence training in valve sizing is usually vendor specific.

Cost:

• Cost for current and past ATC students: TT$1350.00
• Cost for non-ATC students: TT$1600.00
• Payment includes non-refundable registration fee of $300.00.
• Full payment is required at registration.

Duration: 10.5 hours

Lean Process And Six Sigma

Objectives:

• Develop a 360 degree view of Six Sigma and how it can be implemented in any organization.
• Identify the fundamentals of lean manufacturing, lean enterprise, and lean principles.
• Describe the key dimensions of quality – product features and freedom from deficiencies
• Develop attributes and value according to the Kano Model.
• Understand how products and services that have the right features and are free from deficiencies can promote customer satisfaction and attract and retain new customers.
• Describe what is required to regulate a process.
• Give examples of how poor quality affects operating expenses in the areas of appraisal, inspection costs, internal failure costs, and external failure costs.
• Using basic techniques such as DMAIC and how to identify Six Sigma Projects.
• Use specific criteria to evaluate a project.
• Discover root causes of a problem.

Cost: TT$599.00 (includes non-refundable registration fee of $100.00)

Duration: 6 hours

Masonry 1

Objectives:

• Lay Brick/Block
• Lay Tiles
• Rend Wall/Surface

Cost: TT$1900.00 (includes non-refundable registration fee of $700.00)

Duration: 30 hours

Microsoft Excel

Topics covered include:

• Using Formulas and Formatting
• Changing the appearance of a Worksheet
• Copying Data/Using Autofill
• Creating and using formula
• Using Functions/Formula Bar
• Working with multiple worksheets
• Using existing data/workbooks
• Paste Special/Paste Link
• Creating a Budget
• Functions
• Creating and Modifying Charts
• Filters
• Excel Tricks and Tips

Cost: TT$995.00 (Includes non-refundable registration fee of $100.00. )

Duration: 20 hours

Microsoft Word

Topics covered include:

• Creating a Document
• Working with Sections
• Managing Tables and Table Data
• Using Mail Merge
• Styles and Auto Text
• Using Templates

Cost: TT$995.00 (Includes non-refundable registration fee of $100.00. )

Duration: 20 hours

Occupational Safety and Health (OSH) Act of Trinidad and Tobago

Objectives:

• Know the “Preliminary” of the TT OSH Act
• Know the “General Duties” of employers to their employees
• Know the “Rights of Employees” to refuse work where safety or health is in danger

Cost: TT$350.00 (includes non-refundable registration fee of $100.00)

Duration: 4 hours

Piping and Instrumentation Drawing

Objectives:

• Understand the general layout of the P&ID diagram
• Distinguish between the P&ID document and other process diagrams
• Describe symbols for various process equipment units and identify the real-world equivalent unit
• Draw P&ID based on simple plant system

Note: This is not a P&ID Design Course

Cost: TT$350.00 (includes non-refundable registration fee of $100.00)

Duration: 3 hours

Plumbing Fundamentals 1

Objectives include but are not limited to:

• • Read and Interpret System of Measurements
  • Identify Plumbing Pipes and Fittings
  • Identify and Operate Basic Plumbing Hand and Power Tools
  • Measure, Cut and Solvent Weld PVC Pipes
  • Measure, Cut and Thread GWI Pipes
  • Read and Interpret Basic Isometric Sketches
  • Create Material/Quantity Listing
  • Assemble Polyvinyl Chloride (PVC) and Chlorinated Polyvinyl Chloride (CPVC) Pipes and Fittings
  • Assemble Galvanize Wrought Iron (GWI) Pipes and Fittings
  • Assemble Drain Waste & Vent (DWV) Pipes and Fittings
  • Install Plumbing Fixtures WC, SH and LB (ie toilet, shower, sink)
  • Perform Basic Fixture Maintenance

Certification:

• City and Guilds of London Skills Foundation Certificate (Basic Plumbing)
• ATC  Plumbing Foundation Skills Supplementary Certificate

Cost: TT$3795.00

Tools: Students will be required to bring a tool kit of basic tools:

• Hack-saw set (with Lennox blades) OR 12” Plumbers PVC bar saw
• 1/8”-2” PVC Pipe cutter
• 8” Adjustable pliers (slip joint)
• 12” Adjustable pliers (slip joint)
• Measuring tape
• Screwdriver (flat/Phillip)
• 1’ Plumber level (3 spirits)
• 8” Spanner (crescent wrench)

Duration: 24 hours

Point Lisas Energy Association (PLEA) Passport Training

Training covers:

• The associated hazards and risks faced by workers in the industry.
• Methods of eliminating hazards and controlling risks.
• The safety and environmental responsibilities of various personnel.
• Safe systems of work

and much more…

Cost: TT$295.00 (includes non-refundable registration fee of $100.00)

Duration: 10 hours

Preparation for Wireman’s Licence Exam

Mode: Online

Objectives:

1. Gain the knowledge and skill required to install, maintain and repair residential and commercial electrical systems.
2. Understand wiring diagrams for proper planning and layout of electrical wiring, fixtures, panels and raceways.
3. Be able to recognize and put into practice the various statutory requirements as outlined in the T&T Electrical Wiring Code Part 1 and other regulations.
4. Understand the proper use of tools and safe working practices.

Pre-requisite: Diploma in Electrical Installation or equivalent.

Cost: TT$2495.00 (includes non-refundable registration fee of $995.00)

Duration: 24 hours

Printer Repairs

Learn:

• The safety precautions associated with troubleshooting and repairing printers.
• To identify each section in a printer and explain how printers (Dot Matrix, Ink-jet, LaserJet, Multifunction) work.
• To diagnose, troubleshoot and solve common printer (Dot Matrix, Ink-jet, LaserJet, Multifunction) problems.
• To disassemble and reassemble Dot Matrix and LaserJet printers.
• To find printer parts information and how to obtain these parts.

and much more….

Cost: TT$2500.00 (includes non-refundable registration fee of $500.00)

Duration: 30 hours

Process and Instrumentation Drawing

Cost: TT$199.00 (includes non-refundable registration fee of $50.00)

Duration: 3 hours

Programmable Logic Controllers (PLCs) – Level 1

Learn:

• Introduction to the Purpose, Functions, and Operations of PLCs
• Components of PLC Systems
• Hardware Configuration
• I/O Addressing
• Scan and Memory Configuration
• Relay Ladder Logic
• Programming Software: RS Logic, Click
• Basic PLC instruction Set, Timers, Counters
• Programming Applications Using Sequencers

Cost: TT$2200.00 for current ATC students, TT$2500 for all others (includes non-refundable registration fee of $500.00)

Duration: 30 hours

Programmable Logic Controllers (PLCs) – Level 2

Learn:

• Instruction Set Sub-Routines
• Loops – For Next
• CPU ANALOG I/O
• Human Machine Interface (HMI)
• On-line Programming and Troubleshooting
• Descriptors and Report Generation

Cost: TT$3000.00 (includes non-refundable registration fee of $500.00)

Duration: 30 hours

Proposal Writing

Objectives:

• Identify the purpose of a proposal
• Identify different types of proposals
• Identify and perform the steps in the proposal writing process
• Perform a needs analysis and write a goal statement
• Prepare a proposal outline
• Improve their writing skills with a variety of techniques
• Use appropriate resources and ghosting to build a strong case
• Add illustrations to their proposal
• Proofread and edit their proposal
• Add the finishing touches to create a professional-looking final product

Cost: TT$599.00 (includes non-refundable registration fee of $100.00)

Duration: 6 hours

Pumps – Operations, Troubleshooting and Failure Analysis

Target Audience:

• Students and Graduates of Mechanical Engineering Technician Programmes
• Technicians
• Engineers
• Supervisors
• Facilities Managers
• Handymen

Overview:

• Introduction to pumps
• Pump design and construction
• Pump specification and selection
• Pump installation, testing and inspection
• Pump maintenance
• Fault finding and troubleshooting faults

Cost:

• Cost for current and past ATC students: TT$1350.00
• Cost for non-ATC students: TT$1600.00
• Payment includes non-refundable registration fee of $600.00.
• Full payment is required at registration.

Duration: 10 hours

Risk Assessment and Management

Objectives:

• Identify hazards and risks
• Update control measures
• Grasp the fundamentals of accident reports
• Identify risk management techniques
• Outline a disaster recovery plan
• Communicate to the organization

Cost: TT$599.00 (includes non-refundable registration fee of $100.00)

Duration: 6 hours

Solar Panel Installation for Beginners

Objectives:

• Types of Solar Systems
• Equipment Selection
• Basic Calculations
• Construction of simple domestic electrical circuits
• Troubleshooting and testing of various systems

Cost: TT$3500.00 (includes non-refundable registration fee of $1900.00)

Duration: 30 hours

Supply Chain Management

Objectives:

• Take a look at inventory management
• Study supply chain groups
• Review tracking and monitoring methods
• Examine supply chain event management
• Comprehend the flows of supply chain management and data warehouses
• Understand the levels of supply chain management and their effects
• Identify how supply chain management relates to: Customer satisfaction, Improving performance, Lowering costs, and Product development

Cost: TT$599.00 (includes non-refundable registration fee of $100.00)

Duration: 6 hours

Valves

Target Audience:

• Students and Graduates of Mechanical Engineering Technician Programmes
• Technicians
• Engineers
• Supervisors
• Facilities Managers
• Handymen

Overview:

• Types of Valves
• Valve Specifications and Materials
• Valve Operation
• Valve Installation and Maintenance Issues

Cost:

• Cost: TT$1400.00
• Payment includes non-refundable registration fee of $600.00.
• Full payment is required at registration.

Duration: 12 hours

Warehousing – Operation and Integration in Industry

Target Audience:

• Persons in industry who are interested in leaving their department to take up work in the warehouse
• New employees who work in a materials department and want a better understanding of the subject matter, or want to equip themselves for upward mobility, or want to seek transfer to another area within the department
• Persons in search of employment in a warehouse environment

Learn about:

• Organisational structure of a typical warehouse
• Reporting lines, roles, responsibilities and accountability of the functions in the organisation chart
• The processes supported by flow charts
• Relationships and impact of inventory management and purchasing department on the warehouse
• Warehouse design as it relates to the need, size and other requirements of different industries
• Overview of the supply chain

and much more…

Cost: TT$495.00 (includes non-refundable registration fee of TT$100.00)

Duration: 7.5 hours

Wireman/Electrician Supplementary Training

Objective:

• Bridge the (relevant electrical installation theory and practical) gap between the City and Guilds Level 2 Diploma in Engineering IVQ – Electrical and Electronics Technology and the former City and Guilds Diploma in Electrical Installation programme.

Pre-requisite: This course is specifically for students who completed at ATC, the City and Guilds Level 2 Diploma in Engineering IVQ – Electrical and Electronics Technology.

Cost: TT$1700.00 (includes non-refundable registration fee of $300.00)

Duration: 12 hours